(Solved) Ford IDS license not found & Quickloader license expired

obdexpress.co.uk engineer offer the solution to error " Ford IDS3 software license is not found" and Quickloader license expired.

First come several error images of " Ford IDS3 software license is not found".


Then Quickloader error "Unregistered, or license expired 2018.5.11"


Working solution:
Step 1. Free download Ford IDS V113 on mega (from Fly):
https://mega.nz/#!KRh3wA5A!k79Lj9jmwhKOyMhCPQkrCcW-kcox8tx_SH424R0HER8

Step 2:
Download newest Quickloader V5.11 on mega:
https://mega.nz/#!frowWY7L!uc1J4S71EhrC_XtB_irXuSXFiE5TFaOR1oLU4WuUkPI

Step 2: Open "FVDI2 QuickLoader" to click on "IDS Ford", start to do diagnosis job.
Note: You have to open "IDS Ford" from "FVDI2 QuickLoader", otherwise you may get error.


Finally, Ford IDS will work successfully.

Note: the above working solution is for Fly VCM IDS 3 interface.


Good Luck.
Thanks to engineer of www.obdexpress.co.uk

Source:http://blog.obdexpress.co.uk/2019/09/19/fixed-ford-ids-license-not-found/

FORD IDS V114.06 MAZDA IDS 114.04 Native Installation

1. Higher version at higher price

FORD IDS V114.06 +(Online+Offline) Calibration Native Install with Remote Support

IDS Release Level IDS-114.06

MAZDA IDS 114.04

fırst not work same pc

price each soft 107 euro

2x 107 euro =214 euro both price 210 euro

2. Working version at cheaper price

Ford IDS V114.03: 82.99 euro (at a lower price when they have anniversary sale)

Mazda IDS version depends on the VCM2 hardware

VCM2 (sp239-b) & fly SVDI FVDI for Ford Mazda (sp313): Mazda IDS v114.0

Native installation not vmware or other virtual software.
you can use it unlimited time.
installation and activation via team viewer only.
support online programming function also included calibration file.
also included incode calculator for old model key programming or module installation new series need a dealer account.
works on all vcm1-vcm2- original or clone…….
Functions:
* Automatic vehicle recognition
* Read & Clear Diagnostic Trouble Codes (DTCs)
* Live Data-stream with Recording & Playback Functions for Main ECUs
* Guided Fault Finding
* New Software Re-flash for Existing ECUs
* Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)
* Program New Keys (for additional fee)
* Injector Coding
* Set, Adjust or Remove Speed Governors
* DPF Regeneration
* Brake Bleeding
* Steering Angle Resets
* All Other Offline and online Dealer Functions

Source:http://blog.obdexpress.co.uk/2019/09/07/ford-ids-v114-06-mazda-ids-114-04/

How to install+activate Ford IDS 114.03 for VCM II

Ford IDS 114.03 is newly released with new more fix:
1). online programming...Confirmed
2). included calibration file...confirmed.
3). included incode calculator for old model key programming or module installation new series need a dealer account.



Ford IDS 114.03 is tested ok with VCM, VCM2 (original or clone) etc.

VCM 2 SP177-C:
http://www.obdexpress.co.uk/wholesale/ford-vcm-ii-diagnostic-tool-wifi-card.html
VCM 2 SP177-C1:
http://www.obdexpress.co.uk/wholesale/best-ford-vcm-ii-diagnostic-tool-wifi-wireless-version.html
VCM 2 SP177:
http://www.obdexpress.co.uk/wholesale/best-quality-ford-vcm-ii-oem-diagnostic-tool-ids-wireless.html
VXDIAG NANO Ford : is testing

IDS 114.03 installation and activation via teamviewer only (Offline).
Ford IDS 114.03 features in Native remote installation, that means you can use it unlimited time, instead of installing on vmware or other virtual software.

Service for IDS 114.03 remote native installation
http://www.obdexpress.co.uk/wholesale/ford-vcm-ids-v108.01-software.html
Remember install teamviewer in advance before contacting.

Ford IDS 114.03 capabilities:
* Automatic vehicle recognition
* Read & Clear Diagnostic Trouble Codes (DTCs)
* Live Data-stream with Recording & Playback Functions for Main ECUs
* Guided Fault Finding
* New Software Re-flash for Existing ECUs
* Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)
* Program New Keys (for additional fee)
* Injector Coding
* Set, Adjust or Remove Speed Governors
* DPF Regeneration
* Brake Bleeding
* Steering Angle Resets
* All Other Offline and online Dealer Functions

Thanks.
 Source:
http://blog.obdexpress.co.uk/2019/07/22/ford-ids-v114-03-download/

VCM2 clone review: SP177-C1 the best!

obdexpress.co.uk seem to be the place to buy a decent clone their boards seem to be the good quality ones described on mhhauto,

I do use China clone with Mazda IDS and never had issue on 2010+ vehicle. Clone # sp177C-1 is working good also on 2010+ but this model isn't available anymore.
As for sp177c , I have no experience with it. just make sure you don't buy anything that's based on allscanner/VXdiag technology. Those are complete crap

But don't expect any clone VCM2 will do old PCM programming, because of the EEprom programming signal higher voltage required can't be produced by those clones.
In short, when programming these PCM, the VCM sends a higher voltage (around 18v) to 1 pin of the PCM to "open" the programming session. Clones can't do that.
the only tool that I know that does it is the new thing from FLY but....(and there's a BIG but)... it won't let you program some older cluster and ABS ecu. Ive tested it on some cars and so far, not so good.
Better get an OEM VCM2 as I did.
Buy 1 good tool instead of 2 or 3 crap tool


DONT BUY SP177-1
Never worked

DONT BUY SP177-2
1 - USB cable that came with it doesn't even fit the tool. It's just too big to reach the connector.
2 - they state same as sp177-c or sp177-c1 which is a big lie. Components quality is nothing near similar.
3 - most important.. it's unusable. It keeps disconnecting from the laptop every 10 to 20 sec while watching data logger. I don't want to even risk programming with it.

SP177-C1 THE BEST
SP177-C1 is the best, then SP177 I think
A good price. Well worth the money.
Link to SP177-C1: http://blog.obdexpress.co.uk/2018/01/21/vcm-2-best-quality-sp177-c1/

Source:http://blog.obdexpress.co.uk/2019/06/22/vcm2-clone-review-sp177-c1-the-best/

VCM2 SP177, SP177-1, SP177-2, SP177-C, SP177-C1 Reviews

Look here: VCM2 china clone reviews

VCM 2 SP177 review:
Here is a SP177 version with wifi , I have bought the same without wifi 1 month ago and it can do programming and everything a genuine VCM2 can link: http://www.obdexpress.co.uk/wholesale/b…rsion.html

VCM 2 SP177-1 review:
has anyone else bought the sp177-1 from chinese? they are out of stock on the sp177-c so they sold me the sp177-1 which is actually an fvdi 2534 board inside. It uses vcmxloader to start the ids program and does not need a license due to FLY having an account. But i cannot get it to communicate with the pcm and i have installed on windows 7 laptop as instructed.

VCM 2 SP177-2 review:
Bought VCM 2 sp177-2
1 - USB cable that came with it doesn't even fit the tool. It's just too big to reach the connector.
2 - they state same as sp177-c or sp177-c1 which is a big lie. Components quality is nothing near similar.
3 - most important.. it's unusable. It keeps disconnecting from the laptop every 10 to 20 sec while watching data logger. I don't want to even risk programming with it.

VCM 2 SP177-C review:
I have bought this : http://www.obdexpress.co.uk/wholesale/f…-card.html and they sent what was advertised. I have done module programming on 10+ cars (both PWM and CANbus) and every time without any issues. And I will do programming 100% as original

VCM 2 SP177-C1 review:
My sp177-c1 works perfectly on ALL new generation ford / Mazda but have difficulty to achieve some functionality on old ford based ECU (also on Mazda equipped with ford ECU).
I'm pretty sure that the Chinese "engineers" who developed those clones didn't copy the OEM board 100% . They must have took some shortcuts to save $$.


http://blog.obdexpress.co.uk/2019/05/22/vcm2-sp177-sp177-c-sp177-c1-reviews/

Possible to the newest Ford IDS V112 on VCM 2 clone (SP177-C ,SP177-C1)?

Question: Can I use Ford IDS version 112 on VCM2 china clone?

Answer: It depends.

There are different Chinese producers making VCM2 units.

If you use VCM 2 SP177-C or SP177-C1, the latest IDS software you can use is version 108.

If you use VCM 2 SP177-2, you will have good luck with IDS version 112.

VCM 2 SP177-C:

http://www.obdexpress.co.uk/wholesale/ford-vcm-ii-diagnostic-tool-wifi-card.html

VCM 2 SP177-C1:

http://www.obdexpress.co.uk/wholesale/best-ford-vcm-ii-diagnostic-tool-wifi-wireless-version.html

VCM 2 SP177-2:

http://www.obdexpress.co.uk/wholesale/vcmii-vcm2-ford-diagnostic.html

How to know if your VCM is SP177-C or SP177-C1 or SP177-2?

They’re varied from

Pls check your inner board inside your vcm unit.

VCM 2 SP177-C PCB:

http://blog.obdexpress.co.uk/2018/07/25/how-do-you-confirm-vcm2-sp177-c-best-quality/

VCM 2 SP177-C1 PCB:

http://blog.obdexpress.co.uk/2018/11/09/vcm-2-sp177-c1-pcb/

VCM 2 SP177-2PCB :

http://blog.obdexpress.co.uk/2018/06/16/vcm2-sp177-2-good-or-not/

On a side note, compare SP177-C and SP177-C1:

http://blog.obdexpress.co.uk/2018/04/14/vcm-2-clone-sp177-c1-vs-sp177-c/

C1 have usb sticker for wifi. That is, only usb wifi is not included in SP177-C.

It’s the only difference.

Both are Quality A version.

http://blog.obdexpress.co.uk/2019/05/10/ford-ids-v112-on-all-vcm-2-clone/

Solution to China clone VCM 2 error NO VCM Found / Connected on Win10

Post gives the solution to China clone VCM 2 error “NO VCM Found / Connected” on Win10.

Here comes the issue:

I am running windows 10 x64, IDS is working great but I have a Chinese clone VCM 2, I have tried everything but it keeps giving me NO VCM Found/Connected.

 Solution 1:Offered by a VCM 2 user@mcusys

You make sure VCM 2 Connect in VMWare ?

if you sure VCM 2 appear device manager in guest os windows 7 you can recovery firmware instruction.

1.Unplug USB VCM 2 do not connect vcm 2

2.You must start guest OS Windows 7 VMWare and wait for boot complete.

3.Then windows start-up complete you open VCM Manager application.

4.You must open cover rubber-hood near USB port on VCM 2 you see recovery button near MicroSD port.

5.you must press and hold button it and plug USB plug to VCM2 while VCM 2 booting up VCM 2 Manager appear “Recovery” you click button for update firmware vcm 2 match PC software version on VMWare Guest OS.

6.Then firmware update complete you will appear button and can connect VCM and page beep beep! to VCM 2

 Solution 2:Offernd by OBDexpress.co.uk engineer : 

Find this button in the VCM 2 main unit, and then press on it.

Connect the VCM II unit to a laptop/PC with a USB cable

Note that VCM II is only connected to the PC via a USB cable, not connected to the car via an OBD cable

Press the button until the power is connected and all the lights are lighted.

Go to the START menu, then Bosch

Open Ford VCM II Manager, then go to VCM II Update for recovery

Hope it’s helpful to you.

Good luck!

 Source:http://blog.obdexpress.co.uk/2019/04/11/vcm-2-error-no-vcm-found-connected-on-win10/